Automotive Dent Repair - Two Types Of Drawn Arc Stud Welding Guns To Consider

Stud welding guns are tools that a confident homeowner can use for construction purposes, and the devices can be used as well to remove both small and large dents from the body of a vehicle. If you want to try your hand at dent removal, then you may need to decide between the use an arc and CD stud welding gun. Drawn arc welding guns are often chosen. However, there are actually a few different kinds of drawn arc welding guns that can be purchased and used. Read More 

Productivity Down At The Office? Mold Might Be To Blame

Do you run an office? Have you just run your quarterly reports and found that the productivity of your business has taken a dive? Before you go laying off help and slashing spending, try having a mold inspection done. While this may sound silly, mold can play a big role in how well your employees are able to do their job. Read on to learn more. A Bit About Sick Building Syndrome Read More 

Sump Pump Installation Mistakes To Avoid

If your basement does not have a sump pump for some reason, then it is in your best interest to install one. A sump pump can reduce flood damage concerns and mold and mildew formation. If the electricity goes out often in your home due to adverse weather conditions, then make sure to choose a combination sump pump that uses electricity as well as a battery back up. You can install the sump pump yourself if you like to take on DIY projects yourself. Read More 

Ideas And Options For Getting Rid Of The Textured Walls And Ceilings In Your Home

If your house contains textured walls or ceilings, it's very possible your house was built in the 1960s or 1970s. These types of materials were extremely popular during those decades, but the popcorn look can be one of your worst nightmares today. Not only can it be hard to paint over, but textured walls can also begin to crumble and peel off and may contain asbestos, which is very harmful if you breathe it in. Read More 

5 Benefits Of Gas Quenching Over Traditional Liquid Quenching For Thermal Processing Of Metals

Quenching has been used for hundreds of years to harden steel and was one of the first thermal processing techniques to be developed, but modern quenching techniques are very different than the dip in water or oil that medieval blacksmiths used to rely on. Today's quenching techniques involve vacuum chambers, special formula baths, and even gases in place of the usual liquids. Discover how gas quenching improves the hardening process in five distinct ways. Read More